N-BOC-4-ALLYL-4-PIPERIDINECARBOXYLIC ACID
4-ALLYL-PIPERIDINE-1,4-DICARBOXYLIC ACID MONO-TERT-BUTYL ESTER
CAS: 495414-58-9
Molecular Formula: C15H24N2O6
N-BOC-4-ALLYL-4-PIPERIDINECARBOXYLIC ACID - Names and Identifiers
N-BOC-4-ALLYL-4-PIPERIDINECARBOXYLIC ACID - Physico-chemical Properties
| Molecular Formula | C15H24N2O6 |
| Molar Mass | 328.36 |
N-BOC-4-ALLYL-4-PIPERIDINECARBOXYLIC ACID - Risk and Safety
| Hazard Symbols | T - Toxic |
| Risk Codes | 25 - Toxic if swallowed |
| Safety Description | 45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) |
N-BOC-4-ALLYL-4-PIPERIDINECARBOXYLIC ACID - Introduction
4-ALLYL-PIPERIDINE-1,4-DICARBOXYLIC ACID MONO-TERT-BUTYL ESTER (4-allylpiperidine-1, 4-DICARBOXYLIC ACID mono-tert-butyl ESTER) is an organic compound with the chemical formula C14H23NO4.
The properties of the compound are as follows:
-Appearance: Colorless or light yellow transparent liquid
-Melting point: Below 0 ° C
-Boiling point: About 320 ° C
-Solubility: Soluble in many organic solvents such as alcohols, ethers and ketones
4-ALLYL-PIPERIDINE-1,4-DICARBOXYLIC ACID MONO-TERT-BUTYL ESTER Common uses include:
-as an intermediate in organic synthesis. It can be used in the preparation of various organic compounds such as pharmaceuticals, dyes and pesticides.
- 4-ALLYL-PIPERIDINE-1,4-DICARBOXYLIC ACID MONO-TERT-BUTYL ESTER can also be used as a complexing reagent, catalyst and media.
The preparation of the compound often uses an organic synthetic route, and the specific steps may vary depending on the reaction conditions. A common method of preparation is to react 4-allylpiperidine with piperidine-1, 4-dicarboxylic acid mono-tert-butyl ester in a suitable solvent and using a suitable catalyst. The preparation process should pay attention to the reaction conditions, reaction time and temperature control.
For safety information, the following points should be noted:
- 4-ALLYL-PIPERIDINE-1,4-DICARBOXYLIC ACID MONO-TERT-BUTYL ESTER is an organic compound and should avoid contact with strong oxidants and strong acids.
-Wear appropriate personal protective equipment such as gloves, goggles and lab coats during use. Avoid inhalation, ingestion, or skin contact with the compound.
-In the process of using or handling the compound, safety operating procedures should be followed and stored properly to prevent leakage or accidents.
Due to the special nature of chemicals, it is recommended to refer to the relevant literature and safety data sheets before use and operation, and strictly follow the relevant safety procedures.
The properties of the compound are as follows:
-Appearance: Colorless or light yellow transparent liquid
-Melting point: Below 0 ° C
-Boiling point: About 320 ° C
-Solubility: Soluble in many organic solvents such as alcohols, ethers and ketones
4-ALLYL-PIPERIDINE-1,4-DICARBOXYLIC ACID MONO-TERT-BUTYL ESTER Common uses include:
-as an intermediate in organic synthesis. It can be used in the preparation of various organic compounds such as pharmaceuticals, dyes and pesticides.
- 4-ALLYL-PIPERIDINE-1,4-DICARBOXYLIC ACID MONO-TERT-BUTYL ESTER can also be used as a complexing reagent, catalyst and media.
The preparation of the compound often uses an organic synthetic route, and the specific steps may vary depending on the reaction conditions. A common method of preparation is to react 4-allylpiperidine with piperidine-1, 4-dicarboxylic acid mono-tert-butyl ester in a suitable solvent and using a suitable catalyst. The preparation process should pay attention to the reaction conditions, reaction time and temperature control.
For safety information, the following points should be noted:
- 4-ALLYL-PIPERIDINE-1,4-DICARBOXYLIC ACID MONO-TERT-BUTYL ESTER is an organic compound and should avoid contact with strong oxidants and strong acids.
-Wear appropriate personal protective equipment such as gloves, goggles and lab coats during use. Avoid inhalation, ingestion, or skin contact with the compound.
-In the process of using or handling the compound, safety operating procedures should be followed and stored properly to prevent leakage or accidents.
Due to the special nature of chemicals, it is recommended to refer to the relevant literature and safety data sheets before use and operation, and strictly follow the relevant safety procedures.
Last Update：2024-04-09 20:02:46